Skip to product information
1 of 7

KRESS v AMB SPINDLE CLAMP FOR RATRIG STRONGHOLD

KRESS v AMB SPINDLE CLAMP FOR RATRIG STRONGHOLD

Regular price €19,95
Regular price Sale price €19,95
Sale Sold out
Taxes included.

Colour: Black
Mounting screws

Ordering outside NL/BE?

Do you live outside the Netherlands or Belgium, but within the EU and would you like to order this product?
Please contact us.

This Spindle clamp is made for the Kress and AMB spindles. To prevent flex, every other spindle type with a round is mounted with a double mount. Since the shape of the Kress and AMB spindles does not allow this, a single mount is often chosen. This mount designed by BASt is specifically made for this unusual shape. Mounted with 2 long 60mm screws, this provides extra strength against flex.

Fits 4040 slot 10 extrusions such as the RatRig Stronghold One and Pro, but also other Openbuilds machines built on these extrusions.

Supplied with 2x 60mm M6 screw and nut for clamp.
6x M8 mounting screws and Tnuts can be supplied.

SKU:040204

View full details
  • Suitable for

    • RatRig Stronghold One
    • RatRig Stronghold Pro
  • Material

    3D printing of PLA Tough, a plastic with very high strength and toughness, made with starch raw materials derived from renewable plant resources, but less temperature resistant

  • Brand

    BASt

    Designed and Manufactured in the Netherlands by BASt

Additional information

About the Stock

There is a small stock of 3D printed parts, or they are printed to order.

This may mean that it takes up to 3 business days for the parts to be shipped.
Once shipped, you will receive a notification.

If this causes any problems, please contact us before ordering.

Notice 3D Printed Accessories and Attachments

  • The use of any accessory or attachment other than recommended in the operating instructions of the original product for which such accessory or attachment was manufactured may result in risk of personal injury or damage to the machine and will void the warranty.
  • This accessory should only be used by persons who have experience with the original product and are familiar with the risks of using it.
  • BASt is not responsible for damage caused by any use of the original product for which this accessory or attachment was made other than as described in the original user manuals, technical specifications and other published guidelines for its use.
  • BASt is not affiliated with and has no relationship with companies for which accessories are designed. BASt therefore has no influence on adjustments, product versions or other changes in the products for which the accessories are intended. Therefore, no rights can be derived from this.
  • 3D printing uses so-called Fused Deposition Modeling, which means that the print is built up from thin layers that are melted together and thus form a whole. It is therefore normal that you still see some lines. It is also possible that a small thread is hanging somewhere or that you see a bump; this does not affect the quality of the product.
  • Because the tolerances for sizes are small, it can happen that your accessory fits tightly or does not fit. In almost all cases, this can be trimmed with sandpaper or a knife. In some cases, I have already done this myself, which is why you see a slightly different color there. In that case, there is no wear, manufacturing defect or second-choice product.
  • If you have any doubts, please contact me and I will be happy to help you.

Materials

A 3D print can be done with different materials. The most used materials are:

  • PLA-ST, a high strength and toughness plastic made with starch raw materials derived from renewable plant resources. This material has a very high impact resistance, but does not withstand temperatures above 50°.
  • ABS+, Suitable for temperatures up to 100° and impact resistant.
  • PETG, A material similar to the material PET bottles are made of, suitable for temperatures up to 85°.
    Each material has its own specific properties, which can be advantageous or disadvantageous for a particular application.

3D printed items are printed in the material best suited for the intended application.
For example, ABS+ is chosen for grinding jigs. This has a high temperature resistance, but keep an eye on it (also for your gouge itself) that you do not let the metal you are grinding get too hot.


If you have any questions about this, please do not hesitate to contact us.

Colors

For my prints I try to keep a consistent color choice at all times. Unfortunately spools are not always in stock and I will have to choose from the available options.
The preferred color is always indicated in one of the product photos.

If you have a specific color preference, please do not hesitate to contact us.

Note: Colors are always approximate; screens and product lighting may produce different shades.

RatRig CNC Tips

Besides these BASt accessories for the RatRig CNC, I also have a big collection of Tips, Tricks and purchase suggestions. There is definitely something in there that you didn't know yet ;)

To the RatRig CNC Tips